Evaluation of Hesperaloe funifera pulps obtained by a low energy consumption process as a reinforcement material in recycled pulps

  • M.E. Eugenio CIFOR. Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (INIA).
  • R. Martin-Sampedro CIFOR. Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (INIA).
  • E. Revilla CIFOR. Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (INIA).
  • J.C. Villar CIFOR. Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (INIA).

Abstract

The aim of this work is to study the reinforcement capacity of pulps obtained from Hesperaloe funifera using a simple and low energy consumption process (chemi refiner mechanical pulping) once they are added in different percentages to recycled pulps from newspaper and from old corrugated containers (OCC). Pinus radiata kraft pulp was used as a referent reinforcement material. H. funifera acted as a reinforcement material in newspaper and OCC recycled pulps, improving their optical and mechanical properties. While a 25% of H. funifera was the optimal amount added to reinforce the OCC pulp, only a 10% was needed for newspaper pulp. However, the OCC optimal mixture was better reinforced as it showed higher increase in all properties than the optimal newspaper mixture, apart from tensile index. Finally, all mixtures with P. radiata kraft pulp produce handsheet with lower properties, apart from tear index, suggesting than H. funifera is a better reinforcement material.

Downloads

Download data is not yet available.

References

Fairbank M, Detrick R. 2000. Hesperaloe funifera – an excellent reinforcement fiber for mechanical paper grades. Tappi J. 1-5.

Horn RA, Wegner TH, Kugler DE. 1992. Newsprint from blends of kenaf CTMP and deinking recycled newsprint. Tappi J. 69-72.

Lee WT, Mckean WT, Gustafson RR. 1999. The manufacture of bleached pulp from recycled OCC linerboard. Proceeding of Tappi Pulping Conference. 885-893.

Lumiainen JJ, Partanen MT. 1997. Refining of reinforcement kraft pulp for mechanical printing papers. Proceeding of Engineering and Papermarkers Conference-forming bonds for better papermaking, Nashville, TN. 353-364.

Mansfield SD, Kibblewhite RP, Riddell MJC. 2004. Characterization of the reinforcement potential of different softwood kraft fibers in softwood/hardwood pulp mixtures. Wood Fiber Sci. 36 (3), 344-358.

Mclaughlin SP. 2000. Properties of paper made from fibers of Hesperaloe funifera (Agavaceae). Economic Botany. 54 (2), 192-196. http://dx.doi.org/10.1007/BF02907822

Van Tran A. 2002. Recycled old corrugated containers as a partial substitute for virgin hardwood kraft pulp. Appita. 301-316.

Wise LE, Murphy M, D'Adieco A. 1946. Chlorite holocellulose its fractionation and beating on summative wood analysis and on studies on the hemicellulose. Paper Trade J. 122 (2), 35.

Wong A, McLaughlin SP. 2000. Alkaline sulphite pulping of Hesperaloe, an arid-zone native fibre plant from Northern Mexico. Proceeding of Tappi Pulping Conference, Boston. AK19833W.

Published
2012-11-28
How to Cite
Eugenio, M., Martin-Sampedro, R., Revilla, E., & Villar, J. (2012). Evaluation of Hesperaloe funifera pulps obtained by a low energy consumption process as a reinforcement material in recycled pulps. Forest Systems, 21(3), 460-467. https://doi.org/10.5424/fs/2012213-03691
Section
Research Articles