Mechanical properties of structural maritime pine sawn timber from Galicia [Spain] (Pinus pinaster Ait. ssp. atlantica)
Abstract
The use of maritime pine sawn timber in structural applications requires knowledge of its mechanical properties. Standards have changed, however, since the last research on this timber was performed. In the present study, 491 beams of maritime pine from Galicia, of structural-use size but different cross-section, were tested according to these modified standards. Each beam was visually graded according to standard UNE 56.544 and subjected to a four point bending tesThe strength classes assigned by the visual grades awarded suggest this material to have greater structural capacity than that currently assumed. The relationships between the modulus of elasticity, strength and density were also examined.Downloads
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.